Ladder Safety, Electrical Safety & Proper Lifting Training 

Ladder Safety

Let’s ensure your safety while using ladders at Chick-fil-A Puyallup. By following these guidelines you’ll help maintain a safe working environment for everyone.

1.       Know Your Ladders

·       Identify ladder types and their purpose.

2.       Pre-Use Inspection

·       Check for damage before use; report any issues that can cause possible hazards in the near future.

3.       Setup

·       Avoid placing the ladders on any slippery material.

·       Only put ladders on stable and level surfaces.

4.       Climbing and Descending

·       Always maintain three points of contact: two hands and one foot, or two feet and one hand.

·       Avoid carrying items while climbing. Ask someone to hand items to you.

·       Always face the ladder while climbing or descending, taking one step at time.

5.       Work Safely

·       Stay Centered

·       Do not lift anything beyond your capacity or ladder capacity!

·       Avoid overreaching.

6.       Minors

·       Minors are not permitted to work higher than 10 ft off the ground

·       Not permitted to use the roof ladder or be on the roof

Electrical Safety

Electricity is used in most of our equipment, and it is a vital part of our operation, but it can also pose a serious hazard if not handled properly. This training will equip you with essential knowledge and practices to ensure your safety when working with electricity. 

1.       Some of our equipment operates with higher voltage than your typical household, and some equipment has similar electrical safety precautions to your home.

·       Most kitchen cooking equipment is 220V (fryers, grills, ovens, griddle, etc).

·       The ice cream machine is 220V as well.

·       The higher voltages equipment can be identified by heavier/larger power cables and different wall outlets than the ones you see at home. This equipment can be particularly dangerous if the cords, plugs, or outlets are damaged.

·       For ALL electrical equipment, the most important safety action is to inspect the equipment and electrical cords frequently for damage and never use damaged equipment. Any electrical damage or failure needs to be reported immediately to a supervisor and the equipment must be taken out of service.

2.       Know the locations of electrical panels and emergency shut-off switches.

·       Most electrical breaker panels are located in the electrical room (the small room in the Cage, next to the compactor). All panels are labeled and have a brief description of what each breaker provides power to. DO NOT touch the breaker panels unless instructed to by a Shift Lead or Director.

3.       In case of an electrical (Class C) fire

·       The first step in the event of ANY fire is to turn off power to the equipment from the breaker.

·       CO2 fire extinguishers are preferred for putting out electrical fires. Ours are located near the walk-in cooler door, near the Front of House manager stand & near playland. They are very simple to operate – simply pull the pin, point the hose at the base of the fire, and squeeze the lever. Stand approximately 6 feet from the fire, and use 1-2 short blasts, repeating as necessary until the fire is out.

4.       Safe Work Practices

·       Never work on electrical equipment while it is energized. This is authorized only by direction of the Operator and only if absolutely necessary.

·       Before performing any electrical work, de-energize the circuit by turning off the breaker.

·       Keep electrical cords and equipment away from water and other liquids.

·       Avoid overloading circuits or power strips. All equipment we have are assigned to designated outlets.

5.       Report any damage!

·       Report any damaged or malfunctioning electrical equipment to your supervisor immediately.

·       Never attempt to repair electrical equipment unless you are trained and authorized to do so.

Proper Lifting Techniques

1.       Use Your Legs: Bend at the knees and hips, not at the waist. Keep your back straight while lifting.

2.       Get a Good Grip: Use a firm grip on the object you’re lifting to maintain control

3.       Keep it Close: Hold the object close to your body to reduce strain on your back.

4.       Lift Smoothly: Avoid jerking motions; lifting smoothly and steadily.

5.       Use Your Core: Engage your core muscles to provide stability and support to your back.

6.       Avoid Twisting: If you need to turn while lifting, pivot your feet instead of twisting your torso.

7.       Know your limits: Don’t lift objects that are too heavy for you. Ask for help if needed.

8.       Use Proper Equipment: If available, using lifting aids like dollies or carts to help with heavy or bulky items

REMEMBER!!! It’s better to ask for help than to risk injuring yourself.